Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Hand made 3x 18650 battery pack charged but voltage says 3.87v

I resurrected 6x 18650 batteries from a laptop battery , there is nickel connecting the batteries and where a + and - connection should be I soldered on copper wire. Each battery is charged. One is at 3.82v and the other 2 are at 4.2v. I am using them to mod my nerf rival gun which needs a minimal of 9v to turn on , 10v to fire. Anyways, when I connected the terminals together the power sounded way too low. So when I checked the batteries it only read 3.82v . I checked each battery and terminal but they are all fine. Right now I don’t have much money and I cant buy a new power supply for my gun. What do I do? I’ll add a picture if the power pack in about 7-9 hours.

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0

Kommentare:

So is there any way to go without the boards?

von

I can’t sacrifice much money , but I can sacrifice $1-3 if necessary. But is there a way I can create my own, I don’t have boards but a have a lot of spare parts

von

Don't skimp. Lithium isn't forgiving when it blows up or one cell discharges and the other cells overcharge. They have a BMS for a reason.

von

Einen Kommentar hinzufügen

iPhone LCD Display Fix Kits

Die Budgetoption, abgedeckt durch unsere lebenslange Garantie.

Kits kaufen

iPhone LCD Display Fix Kits

Reduziere die Reparaturkosten, nicht die Qualität.

Kits kaufen

3 Antworten

Gewählte Lösung

Maybe you can find the needed battery pack on Amazon or eBay more cheaply then trying to built your own here.

As you can see there’s quite a lot of engineering involved in making a battery pack. You can get into trouble very easily here! Over charging can cause the battery to explode! And what that happens ignite in a very hot chemical fire. The alignment of the batteries (series and parallel) also can create instability! As some cells will charge/discharge at a different rate which is why you need the circuitry to monitor this.

War diese Antwort hilfreich?

Bewertung 2

Kommentare:

I'm with you on this. Get a common RC connector and a matching battery and stop flirting with danger.

von

Even the battery recyclers have issues with them! Lithium-Ion Batteries Are a Literal Trash Fire, and Getting Worse

von

@danj The other issue is the crap knockoffs. Back when 2 people here had a S3, we went through so many knockoffs I can tell from the label. A lot of the fakes are too good to know right away unless you have a small sample of known fake cells.

One of the S3's I have that doesn't work and is in poor shape (the one with a battery) has one I think is genuine, but I'm leery of it because of how many knockoffs floated around where they openly used them with case inflation and runtime issues. The dead giveaway was faded print for the serial number.

Sometimes you have no choice (Ex: Older laptops like the T61) or the OEM is far more expensive then the actual device. I don't have an issue with those devices with a knockoff, but at least use a good one. In some cases, knockoff is the way to go - especially with 2005-7/8 laptops on eBay. A lot of those Sony packs are part of the many battery recalls. Some sellers even get rid of the battery if it's dead or barely functional because of how common the recalled packs were. It's frustrating because they somehow made a cell that doesn't die easily, but I understand because I'm aware of the problem. I've seen some of them go for 10+ YEARS at reduced capacity normally; my nc6000 came with one that ran for 1 HOUR and it was from ~2005 and I got 6 months out of it. I miss those batteries since we lost them due to the Sony recall :(.

von

I’m stupid, I didn’t see it

von

Einen Kommentar hinzufügen

Did you review this guide? AN EXHAUSTIVE GUIDE TO BUILDING 18650 PACKS

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Okay I’ve done more research, aparrently I do need a board 3 18650 batteries will only make 3.7v I need a board to make them all work I needed a minimum of 12v of power

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Brayden S wird auf ewig dankbar sein.
Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 5

Insgesamt: 74