Zum Hauptinhalt wechseln

Modell A1312 / Mitte 2011 / 2,7 & 3,1 GHz Core i5 oder 3,4 GHz Core i7 Prozessor, ID iMac12,2

708 Fragen Alle anzeigen

Machine turns on but no chime, no PRAM response, black screen ...

I tried the usual PRAM reset, no response, I connected to external screen, no signal, I tried T mode , no icons on neither internal or external screen. I removed the native LCD, to check the LED lights, I have 1 and 2 but no 3 nor 4. That would mean logic board is toast, right?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Hilfreichste Antwort

If you disconnected the display LED’s 3 & 4 will also won’t light. So you need to make sure the display is wired up to be sure.

You likely have a burn’t GPU board.

War diese Antwort hilfreich?

Bewertung 1

5 Kommentare:

OK, I will hook up the display and try and peer in behind to see if I can make out how many LED lights are coming on...

von

Dan, with the Display hooked up all four connectors, I still only have 2 led lights. Does that then confirm your most likely scenario of a fired GPU? I had jumped the gun last night and had ordered a good used logic board...but if need be I can replace or send in the GPU for repair as well...

von

LED 3 - Indicates that the computer and the video card are communicating. This LED will be ON when the computer is communicating properly with the video card. If LEDs 1 and 2 are ON and you heard the startup sound, but LED 3 is OFF, then the video card might be installed incorrectly or need replacement.

LED 4 - Indicates that the computer and the LCD display panel are communicating. This LED will be ON when the computer is turned on and video signal is being generated. If the LED is ON and there is no image on the LCD display panel, the LCD display panel or inverter might be installed incorrectly or need replacement.

von

@Dan, Given the new info I provided : with the display connected, I still only 2 LEDs your original guess remains, that I need to replace or repair the GPU, and that it is unlikely to be the logic board? There is no way to tell which one is the culprit then at all, other than trial and error?

von

Your GPU board has failed if LED #3 is off - "Indicates that the computer and the video card are communicating" which is false here so its bad.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Jurgen wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 31