Einstellungen

Graphics card resistor issue

So, I removed the resistor from the logic board so I could use the mac, but when I reseted the smc and nvram I got no screen. And I lost the resistor but when I touch with my screwdriver the screen turns on. Now comes the part where I need your help, I screw up the resistor pad (its brown), how can I fix it, and if I can, where can I buy it ?

New and focused image

I found this, but I don’t know what I am looking at

Also found this, I guess this is something helpful no?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

3 Kommentare

Your picture is too blurred (and dirty) to see the damage.

Try using a tripod as well as increase the light (indirect soft lighting, no hot spots) so your camera uses a faster shutter speed and smaller aperture.

31. Jul 2020 von Dan

I posted a better image

31. Jul 2020 von ze_castro

@ze_castro - Now you need the boardview drawing so you can identify the part by its placement and then identify the pad point.

1. Aug 2020 von Dan

Einen Kommentar hinzufügen

Veröffentlicht: 31. Jul 2020

Einstellungen

@ze_castro - Much better! Can we try cleaning the surfaces a bit with a cotton swab and isopropyl alcohol so the flux and junk is removed.

The question is how much of the copper pad is still present. If not then you'll need to figure out where the nearest point the trace was part of. This will require access to the schematics and board views for your logic board. Locate the 820-???? number on the board as we’ll need it to find the info to trace out the circuit.

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

Einen Kommentar hinzufügen

MacBook Pro (15 Zoll, Anfang 2011, Unibody)

Graphics card resistor issue

Update (07/31/2020)

Update #1

Update #2

1 Antwort

Antwort hinzufügen