Battery Connector Broke off?

Question

iPhone 4

Vierte iPhone Generation. Die Reparatur an sich ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. GSM mit 8, 16 oder 32 GB Kapazität, Modell A1332 in schwarz und weiß.

2396 Fragen Alle anzeigen

Jared @jared43856

Rep: 530

7

73

3

Veröffentlicht: 26. Sep 2011

Einstellungen

Battery Connector Broke off?

I pulled the battery off wrong and pulled the connector off the board. I soldered it back on and its working now because when i hook a battery up it will turn on without being plugged in. Im just wondering about the connections on the connector i was able to solder the four contact points in the rear but the two on the front that are underneath i dont know how to get at to solder them but do they matter as long as the four in the back are soldered?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung -1

3 Kommentare

does anyone know

28. Sep 2011 von Jared

come on someone help me out

5. Okt 2011 von Jared

jared, have you checked on your PCB to see where the two other points connect? Any traces coming of them? If your battery works, charges etc, it is possible that those two are to hold the connector onto the board.

5. Okt 2011 von oldturkey03

Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

Jared @jared43856

Rep: 530

7

73

3

Veröffentlicht: 13. Okt 2011

Einstellungen

I guess im better than you at this stuff then because i replaced mine and now its working 100% again :)

War diese Antwort hilfreich?

Ja Nein

Bewertung 0

1 Kommentar:

+ excellent job and congratulations on getting it accomplished.

17. Okt 2011 von oldturkey03

Einen Kommentar hinzufügen

jared, have you checked on your PCB to see where the two other points connect? Any traces coming of them? If your battery works, charges etc, it is possible that those two are to hold the connector onto the board. — oldturkey03
+ excellent job and congratulations on getting it accomplished. — oldturkey03