How do I find a replacement for the felt washer that sits at the bottom of the entire grinding assemly. Mine is worn thin and broken in one area. The grinder won’t work without it.
Ist dies eine gute Frage?
Rep: 785,8 Tsd.
1,1 Tsd.
895
2,3 Tsd.
@mkstop are we talking about the felt ring as shown in picture 9 of this guide Störung an der BCG800XL Mühle wegen abgenutztem Flügelrad ? We would need the diameter of the center hole and the outside diameter to try and match it up. Felt washers are readily available at multiple sources like Amazon, ebay and hundreds more. Should not be a problem to get this fixed.
War diese Antwort hilfreich?
Regarding Troubleshooting#2, I had a similar problem. Namely, the upper burr was tightening itself onto the lower due to the wear of its handle. I solved it by dismantling everything for getting out as much coffee as possible, and unlocking the upper burr using (gently) a hammer. However, a smarter choice could be to simply remove the metallic handle and untighten with a tool (screwdriver?) the lower burr until it's loose enough to put the handle back in and remove the whole part from the grinder
Letzte 24 Stunden: 0
Letzte 7 Tage: 10
Letzte 30 Tage: 52
Insgesamt: 2,231
