Repariere deine Sachen Community Store

Reparatur- und Demontageanleitungen für von Apple konzipierte Smartwatches.

978 Fragen Alle anzeigen

Einstellungen

AppleWatch only displays logo intermittently after battery replacement

I replaced the battery on my Apple Watch following the instructions here:

Apple Watch Series 1 Akku tauschen

Everything went fine, but when charging it for the first time:

  1. I don’t get the changing snake symbol
  2. The Apple logo will display for <1 sec and then stay off for about a minute.

I don’t think I tore any of the cables or shorted anything.

I am thinking it might be a defective battery. Has anyone had this issue and resolved it by replacing the battery with another new battery?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

My best friend had this issue and sent his series 1 to me for a new battery. Although I’ve tried two new batteries from different suppliers, it still did the same thing. I’m wondering if the software got corrupted or something. I would maybe try another supplier for the battery. I recommend mobile sentrix.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

@hootonberg @michael_314

I'm dealing with this right now. I've received 3 batteries from iFixit and all have been defective. The voltages have been way too low (2.2V to 2.4V) to accept a charge or boot the watch. It should be closer to 3.7V-3.8V at rest even when fully depleted. I have a thread going here (Apple Watch S1, Still have a boot loop after battery replacement) and over at macrumors (https://forums.macrumors.com/threads/ser...)

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Michael Gagne wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 1

Letzte 30 Tage: 13

Insgesamt: 719