Zum Hauptinhalt wechseln

Dokumentation und Anleitungen für die Reparatur des am 22. September 2017 veröffentlichten iPhone 8. Modellnummern A1863, A1905.

873 Fragen Alle anzeigen

Can somebody help with part number for J6400? Cant find it on DigiKey

I cant seem to find the part number anywhere for the iphone 8 FPC Charging dock connector, I’ve tried all the numbers from the iPhone schematics but none of them work. Also tried searching by FPC and pins but nothing. Would be much appreciated.

Also can someone also tell me if this FPC connection port is ok? There are 3 pins there that look a little how you going on the motherboard but diode readings are good. Pic attached.

Block Image

Block Image

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

You wont find those FPC connectors on any official distributor website, or if you do, the MOQ will be so high you’ll faint. You will have to buy these from resellers like iFixit, MobileSentrix, or eBay and Aliexpress.

It must be said that soldering FPC connectors is not trivial, even for experienced micro-soldering techs. Especially the long ones like this one. Applying heat while trying not to melt a plastic part is anything but easy. I would order several (like 5) just in case. You’ll also need to test each pin individually to insure it is properly soldered and connecting. Be wary of applying too much heat as you may cause damage elsewhere on the board.

Ideally, practice on a dead board first if you haven’t done this kind of work before.

War diese Antwort hilfreich?

Bewertung 3

1 Kommentar:

Mobile sentrix is good, I live local to them

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Tommy Duris wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 45