Zum Hauptinhalt wechseln

Modell A1311 / Mitte 2011 / 2.5 & 2.7 GHz Core i5 oder 2.8 GHz Core i7 Prozessor

432 Fragen Alle anzeigen

2011 21.5" iMac Logic Board Repair Help!

Hey guys!

So I just picked up a 2011 21.5” imac. Previous owner said it wouldn't turn in, put in a replacement powersupply, and still wouldn't turn on. Upon further inspection, only the 4th LED lights up (technically LED #1) and nothing else lights up. I tried using the spare PSU I was given, and a 27” PSU I had laying around. Still nothing, so I assumed it's a logic board issue.

I don't see any damage or corrosion on the board at all, is there a common failure point in these boards I could attempt to pinpoint and fix? I really don't want to spend money on a logic board.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

The most common issue is the MXM GPU board fails.

If the system had been sitting awhile unplugged you likely need a fresh PRAM battery as well.

War diese Antwort hilfreich?

Bewertung 0

5 Kommentare:

Would the bad GPU cause the system to not boot, and the other diagnostic LEDs not light up?

von

Yes, a short can do that. I've seen a few that had a bad cap.

von

@danj if I remove the GPU, could I attempt to power it on with it removed? I know I won't get any display image, but hoping to see more diagnostics LEDs light up

von

In its self it won't offer enough information diagnostically. I mostly use a DVM to test the power rails and VRM's

I have a few spare GPU boards which I could use to test things. Rarely have I needed to do that. But thats me not someone who is a DIY fixer.

Do you have access to a second known working iMac or the same series which you could borrow the GPU board.

von

@danj I don't, but I ordered a barebones logic board for $40

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Corbin Titus wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 3

Letzte 30 Tage: 3

Insgesamt: 77