Repariere deine Sachen Community Store

Released in 1989 by apple computer, discontinued in 1991

24 Fragen Alle anzeigen

Einstellungen

Computer not booting after recap

I bought a Macintosh SE 1/20. It booted correctly from HDD but showed first signs of corrosion on the logic board. I recapped it and reassembled. Now it gives the boot chime followed by a happy mac. Then it starts reading from the HDD. Seconds later it gives a sad mac with error code:

0000000F

00000063

Can anyone give me a hint where to look?

Best,

Markus

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

Did you replace the PRAM battery? Also check the socket sometimes the contacts are dirty.

You may need the 3.5” disks that came with the system to run the diagnostics.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

2 Kommentare:

Hi @danj,

Thanks for the reply. I did replace the PRAM battery. Checked with a system disk and I’m able to boot from a system 7.0.1 floppy.

Guess it’s a problem with the system on the HDD. Going to reinstall and check again.

von

@mafo - Yep! Needs a new drive ;-{

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Markus Forster wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 21

Insgesamt: 127