The port has been like this since I purchased it, but the pins were fine for about a couple of months before one pin bent, so I bent it back. Now it’s to the point where it won’t charge anymore.
Ist dies eine gute Frage?
Rep: 2,7 Tsd.
6
3
2
really for bent pins in a charger its either you carefully try to bend the pins back into position
or
replace the connector.
these are pretty decently documented so you should be able to scrounge a new connector. but there isnt much else that can be done.
good luck!
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 2
Letzte 30 Tage: 11
Insgesamt: 58
