Missing Pads Charge Port

Question

iPad 6

Die sechste iPad-Generation wurde im März 2018 veröffentlicht. Erhältlich als Wi-Fi und LTE mit 32 und 128 GB Speicheroptionen. Verfügt über ein 9,7" Retina Display und einem 64-bit A10 Fusion Chip.

222 Fragen Alle anzeigen

mmejia04 @mmejia04

Rep: 13

2

Veröffentlicht: 29. Jul 2021

Einstellungen

Missing Pads Charge Port

Hello,

I am missing charge port pads for pins 5, 12, 14, and 20 for an iPad 6th Generation WIFI. Can some help me identify any test points on board where I can jump these to the connector?

Thanks in advance!

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 1

5 Kommentare

you need to mark the pads in the photo or picture - the numbers of pins and lines are not marked on any of the available diagrams (let's at least set the starting point and the direction of counting - so as not to make a stupid mistake). At the same time, I confirm - such a check is possible

30. Jul 2021 von bert.harmidomski

I am missing the ones highlighted in light blue.

30. Jul 2021 von mmejia04

wait...

31. Jul 2021 von bert.harmidomski

mmejia04 post a picture of your actual board as well. That way we can actually see the placement of the components and follow the traces as per schematic....

31. Jul 2021 von oldturkey03

I posted a new picture, the pads inside the red boxes are the ones needed. The other pads are either connected to ground or have a second connection to the same point.

31. Jul 2021 von mmejia04

Einen Kommentar hinzufügen

1 Antwort

you need to mark the pads in the photo or picture - the numbers of pins and lines are not marked on any of the available diagrams (let's at least set the starting point and the direction of counting - so as not to make a stupid mistake). At the same time, I confirm - such a check is possible — bert.harmidomski
mmejia04 post a picture of your actual board as well. That way we can actually see the placement of the components and follow the traces as per schematic.... — oldturkey03
I posted a new picture, the pads inside the red boxes are the ones needed. The other pads are either connected to ground or have a second connection to the same point. — mmejia04