Zum Hauptinhalt wechseln

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s Plus gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

1042 Fragen Alle anzeigen

Screen has separated from back. Never dropped.

I have an old normally functioning 6s+. Sits on my office desk as an iPod. Without any notable incidents, the left side of the screen has separated from the back. Is it an easy fix?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

The screen is glued to a plastic frame which is then clipped into the frame.

I’m assuming the glue came undone, but if you could post a picture it would be helpfull to tell.

Profesionally speaking, the screen should be replaced if the glue is done, but you could apply a small amount of grazy glue as well and hold the screen in place while it dries. It should hold for a while.

Less is more in this case, only place a very small amount so you don’t glues things that are not suposed to be glued togerther.

I hope this helps

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Hello

Even with loose adhesive the display should not lift from the frame very much.

What will make the display raise significantly from the frame would be battery expanding.

The battery is on the left side of the phone (when looking at the screen) and will push the display out when it begins to expand.

Please seek battery replacement as lithium batteries can be risky when they become puffed up or damaged.

If you’re lucky the screen shall be re-used and you can reapply adhesive for the frame.

Best of luck!

james

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Tom Cox wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 29