Repariere deine Sachen Community Store

Der Advance SP kam als Nachfolger des Advance 2005 auf dem Markt. Er hat ein quadratisches Klappgehäuse.

163 Fragen Alle anzeigen

Einstellungen

My SP has the screen white but plays games fine.

After turning on the GBA, the screen goes blank but the sounds play. Games load and button input with the game works fine, so the game appears to run fine. The only problem is the video output.

I swapped the screen for another one that I know works perfectly and the GBA shows the same issue no matter the screen, so it must be a damaged connector or something with the motherboard.

Where should I start?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

Hi Nan!

I know that if the ribbon cable is not all in the connector, it can show the same issue you got now. Is it deep enough in the connector, for like 100% sure and locked? If yes, then I'm afraid you should replace the motherboard... Could be the connector or any other micro component which failed.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

2 Kommentare:

Hello koppie007.

Yes, before making this thread I swapped the screen and tested it in another SP that I know works, and I confirmed it wasn't an issue related to the screen. It must be something with the motherboard.

Thing is, I don't know where could I start to troubleshoot my issue. Maybe the connector works but it doesn't get the video signals right?

Thanks!

von

@anana Yes, I think the connector is done for, as everything else is actually working. Could also be a capacitor.. It's hardy to say to be honest :(.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

NaN wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 7

Insgesamt: 62