Repariere deine Sachen Community Store

Modell A1059 oder A1099 / 20, 40, oder 60 GB Festplatte/berührungsempfindliches Klickrad

227 Fragen Alle anzeigen

Einstellungen

Both iFlash board and HDD not working

Yesterday I installed a iFlash ATA1 board in my iPod but keeps showing a folder icon and a dead iPod.

(I've tried every drive format such as FAT32, exFAT and Mac OS Extended journaled and even tried using a SD card from a different brand that would work in the iFlash boards)

I put the HDD back in the iPod it booted normally so I knew that my cable wasn't broken.

When I tried to put the iFlash board back in the iPod it still didn't work and the HDD doesn't work anymore.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

@scharre possible that the iFlash shortened out the board or the connector. Verify all connections etc. Place the iPod in Diagnostic Mode as described on here ( as well as on here and multiple other places) and see what it tells you. Get a USB to Zip connector and see if your computer can still detect the HDD when you connect it via USB port.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

2 Kommentare:

I tried resetting the iPod by holding down the menu and play/pause button and it booted (so that's great).

Now says that the hold switch is still turned on even when i turn the hold switch on and off

von

I also looked on the back of my iFlas board and there are no connection points to short on the board (just to let you know)

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Scharre wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 6

Letzte 30 Tage: 15

Insgesamt: 170