Repariere deine Sachen Community Store

Zerlege- und Reparaturanleitungen für das Samsung Galaxy Note 20 Ultra 5G Android Smartphone. Erschienen im August 2020.

46 Fragen Alle anzeigen

Einstellungen

Battery Connector Temp Sense Pads?

Hi there, I was wondering if the temp sense pads/tracks are essential to charging, powering and/or turning on the phone.

I am currently facing a similar situation as this (https://forum.xda-developers.com/t/help-...), where the battery connector has been burnt off.

Thank you.

Edit: The smaller, slimmer pins/pads could be generally known as signal pins. I'm asking about the middle four pins of the female component.

Block Image

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
3 Kommentare

Burnt off? By what? Any pics of the board?

von

@strongbow it's this same pcb, just checking whether the 4 centre pins/pads are required; can't seem to find the Note 20 Ultra boardview Battery Power Connector Burnt Repair

von

@zacksg I'd say they're required. They wouldn't be there if they weren't. You might be fighting a losing battle.

von

Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

The temp sensor is located on the wireless charging coil on these devices. If that sensor isn't connected or can't communicate with the device, it won't charge but it should still turn on as long as there aren't any other damage.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

2 Kommentare:

@hootonberg Do you happen to know what are the smaller slimmer pads at the battery pin connector for then?

von

@zacksg my guess would be to communicate with the BMS board attached to the battery. There may be an additional temp sensor in there. But the BMS will monitor voltage, charge cycles, current, etc.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Zack Sg wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 18

Insgesamt: 159