Repariere deine Sachen Community Store

A gaming PC is a personal computer specifically designed and optimized for playing video games.

32 Fragen Alle anzeigen

Einstellungen

Monitor is saying no signal but pc is running . Been like this since i

So i bought a ABS Gladiator from newegg and every since i received it the monitor has been saying no signal. I’ve tried every method i can think of and researched about and nothing seems to work. So I turned to my community to seek a expert for assistance. I’ve uploaded the following pictures to show if anything is wrong. The specs for my pc is:

  • CPU: Intel Core i7-12700KF 3.6GHz (5.0GHz Turbo) 12-Core 20-Thread
  • GPU: NVIDIA GeForce RTX 3070 Ti 8GB (Brand May Vary)
  • Chipset: Intel Z690
  • RAM: 16GB (2x8GB) DDR4 3000MHz
  • SSD: 1TB M.2 NVMe SSD
  • CPU Cooler: RGB AIO Cooler
  • PSU: 700W Gold
  • Case: Deepcool Matrexx 50
  • Operating System: Windows 10 Home
Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
3 Kommentare

Since i Got it*

von

@jayeff the mother board is a Asus Prime z690-p wifi ddr4

von

@jayeff There isn’f a audio speaker on the motherboard.

von

Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

@jose170568

Can you get into BIOS with a display?

Do you hear 1 beep after it starts up?

If no beeps heard at all check if there is a system speaker (example only) attached to the motherboard (see System warning speaker header pin location p.1-19 of the user manual)

It may not be passing POST (power on self test) for some reason - see p.2-21 of the manual for beep codes meaning

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

14 Kommentare:

@jayeff I cannot get into BIOS with display. I hear no beeps . The version of z690-p is ASUS Prime.

von

@jayeff As you can tell I’m sort of new to pc configuration

von

@jose170568

I was updating my answer above with what to check for to get beeps, when you replied so follow that.

von

@jose170568

Did you install the ram modules in slot A2 and B2 - see p.1-5 of the manual? (not A1 & A2 or B1 & B2)

Make sure that the power cord is discnnected from the PSU when removing /installing anything on the motherboard

von

@jayeff I have ram stick installed in A1 & B2, Also power supply disconnected

von

9 weitere Kommentare anzeigen

Einen Kommentar hinzufügen

Antwort hinzufügen

Jose Perez-Garcia Jr wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 15

Insgesamt: 741