Repariere deine Sachen Community Store

Das Flaggschiff-Smartphone von Huawei erschien im April 2019. Es hat ein 6,47 Zoll FHD+OLED Display, eine Hauptkamera mit 40 MP und 8 MP Telekamera und einen neuen Ohrlautsprecher. Der Fingerabdrucksensor befindet sich im Display,

50 Fragen Alle anzeigen

Einstellungen

Smd parts on the main board p30 pro

Hello. I am wondering if you know what size a smd resistor is on the board please. I have full schematic. It is part reference r1278 100 ohms resistor. I believe it to be one of the smallest parts available but I don't have such a measure device on my microscope. It is a resistor right near the screen connection. Photos are attached. You can see missing resistor.

Block Image

Block Image

Block Image

I'm unsure why it appears to have a fry mark where it obviously burnt out, i will fit a 100 ohms resistor and then test that pin to earth.

Also can you help advise how to remove the shields on this board, particularly the one on the rear side of where the battery connection is. Is it just a pry off or is there any solder to melt?

Block Image

Any help or advice would be much appreciated

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

I believe that these resistors are 0.12 by 0.06 inch size. As for the shields, there is no solder to melt. You can just peel/pry them off. I hope this helps.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

2 Kommentare:

Thanks Shane. I appreciate your help. I'm assuming that you missed a 0 on the numbers and meant 0.012 * 0.006? Being the second smallest? Not being cocky, I just like to be absolutely clear.

von

@sean No problem. And yeah, thanks for the correction.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

sean wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 20

Insgesamt: 132