Zum Hauptinhalt wechseln

Das im November 2020 erschienene 13" MacBook Air verfügt über Apples Arm-basierten M1-SoC mit einer 8-Kern-CPU und bis zu einer 8-Kern-GPU. (Modell A2337 / EMC 3598 mit zwei Thunderbolt 3-Anschlüssen)

183 Fragen Alle anzeigen

What are these copper things on the battery?

Hi,

When I was cleaning my laptop from liquid damage, I accidentally removed this tape, uncovering these in the process, don't ask me why. Now I'm wondering what they are, heat sinks? There was also some kind of blue gel on them, anyone know what the blue gel could be? If they are heat sinks, do you think I can replace the blue gel with e.g. cooling paste? Thanks in advance!

Block Image

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
2 Kommentare

Really cannot tell from the pics but sometimes the Bluetooth and or wifi antennas are made of copper, places on the end of the batterys and covered with either semi silver or black tape. If it's one of the two things I mentioned, a closer pic of both the front and back of the batteries would be greatly helpful.

von

Hi Thomas,

I have added the pictures you requested. Cheers!

von

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

It looks like you went a bit too far in taking things apart!

These are the battery contacts which are welded to the bus bars leading to the micro controller board and then onward to the system via the power feed.

I would carefully re-assemble the battery putting the insulator pads so things don’t short out if the battery is still good. Otherwise time to dispose of it properly at a battery recycle center with the insularity’s back on as you don’t want to cause an electrical fire.

War diese Antwort hilfreich?

Bewertung 1

3 Kommentare:

Are the insulator pads you are talking about the tape I removed? The things right under the contacts in the first picture. And is it possible to just glue that back, or what was the blue gel?

von

@h3j - Yes! The tape shouldn’t have been removed. You will need to use a spray adhesive if the tape has lost its grip.

The gel is used to prevent oxidation similar to how one uses grease with auto light bulbs. As I don’t go this far I can’t tell you what to use to replace it if you are thinking on reusing the battery. I would strongly recommend installing a new battery as it won’t take much wetness to cause a serious issue.

von

I will try to use some silica gel then. Thanks for everything!

von

Einen Kommentar hinzufügen

Antwort hinzufügen

h3j wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 2

Insgesamt: 51