Zum Hauptinhalt wechseln

The Arduino Uno is an open-source microcontroller board based on the Microchip ATmega328P.

2 Fragen Alle anzeigen

This isn’t really a repair I just need someone with some experience

Block Image

This morning I accidentally fried my R3 I don’t know how, it was hooked up to the 9V battery and it was running blink as a test suddenly the lights went out and the 47uf capacitors started getting hot. So it’s time for an upgrade I have the R4 on its way but is there any way to get the R3 temporarily working

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 2
2 Kommentare

It might be a blown capacitor, can you check?

von

@ryan0001 idk how also I don’t have a volt meter available I believe I blew a fuse and that is causing them to get hot

von

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

@thomas35549 a blown fuse would not cause this, If anything I would suspect the voltage regulator U1 (AMS1117) next to your DC In Jack.

Block Image

Here is the layout Uno 3 Component Layout and here is the schematic Uno 3 Schematic The datesheet for the voltage regulator is here AMS1117

War diese Antwort hilfreich?

Bewertung 1

1 Kommentar:

Ok thank you

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Thomas wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 18

Insgesamt: 61