Repariere deine Sachen Community Store

A1706 / EMC 3071 - herausgekommen im November 2016. Dieses 13" Macbook Pro führt die OLED Touch Bar ein. Es bietet einen Dual-Core "Skylake" Intel Core i5 CPU und vier Thunderbolt 3 Ports.

241 Fragen Alle anzeigen

Einstellungen

1RS fell off during battery replacement, fan on constantly

I recently replaced my battery, tested and it’s working fine.

I noticed when I initially removed the lower case a “1RS” was out of place. I’m not sure if this happened when I was removing the case.

  1. what is a 1RS?
  2. Can it be replaced (soldered back into place)
  3. Do I need a new part?

When I turned my MacBook on, the battery was working perfectly, charging etc, however the fan has been on constantly.

I’ve preformed a SMC, PRAM & NVRAM reset and the issue with the fan still exists.

Block Image

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 2
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

@bmcdermott that is reference designator L3500 which is a PIM B062D-SM series 1.5UH 20% 12.5A 0.017OHM inductor. The series is hard to match but the inductor is available at places like this Even so the series is different, it will still fit the solder pads. If unsure of that download the datasheet for the inductor from the site I linked to and it will have the dimension for the solder pads on there. Does not look like it is related to your fan issue at all but it is part of the TBT 5V regulator circuit.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Oonagh wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 31