Repariere deine Sachen Community Store

Modell A1312 / Mitte 2011 / 2,7 & 3,1 GHz Core i5 oder 3,4 GHz Core i7 Prozessor, ID iMac12,2

709 Fragen Alle anzeigen

Einstellungen

iMac beeping 3 times and has a blank screen

Hi there,

I have just started up my iMac and it keeps booting with 3 small beeps, 3 long beeps then 3 small beeps. I have been on the phone to apple and they are no help. This just keeps on looping and I have taken out the RAM and reinserted. I would appreciate it if I could get some help on this.

TIA

Taza

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

@taza Here are a couple things you could try:

  1. Try removing the RAM completely from the iMac
    • Does it still give you the same sequence? If so, then try each RAM module one by one to check if it works or not. Maybe one of them doesn't work which would cause the iMac to beep.
    • It's also possible if someone placed the RAM into the slot in the wrong way and damaged a slot, so try the other slots if you suspect one of them doesn't work.
  2. Try SMC reset
    • Unplug the power cord, wait 15 seconds, attach the power cord, wait 5 seconds, then power on.
    • It may not work but it has helped for some people
  3. If you see a loading bar, then the iMac is probably updating its firmware, which could take a while

I hope this helps :)

War diese Antwort hilfreich?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

Taza wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 24