WRX986SIHZ00 Why is my ice machine not dispensing ice?

Hi @jvb92859

Try running service test #18 Ice Door Motor and check if if it is OK.

If the ice door doesn't shut properly, warmer air can enter and it may not get cold enough in the ice maker to produce any ice.

With regards to Test #37, I think that this test (along with Test #58) just verifies that the ice box thermistor circuit is working within specifications and not that the actual temperature in the ice maker is OK to make ice.

By this I mean that it tests that the circuit is not open circuit i.e. OL or ∞ Ohms or short circuit i.e. 0.00 Ohms and that the resistance is somewhere between ~8K Ohms (resistance for 36°F) and ~23.4K Ohms (resistance for 0°F).

For example if it measured 23 K Ohms when there was actually still water there then this may be the reason why the fan is turned off. It doesn't have to be operated to keep the area cold as the control board thinks that it is cold enough

Perhaps measure the resistance of the thermistor at the main control board to see what it is. Disconnect the power to the refrigerator and unplug the P8 harness cable from the board and measure the resistance between pins 1(orange wire) and 2 (white wire) on the harness cable plug (not the board)

¹ Thermistor resistance values as per the tech sheet for the refrigerator.