Zum Hauptinhalt wechseln

Der PowerMac G5 ist ein Desktop-Computer, der erstmals 2003 von Apple Corporation produziert wurde. Diese Anleitung zeigt dir, wie du den PowerMac G5 (Modellnummer A1047, EMC: 2061, von 2004) reparieren kannst.

Help Identifying a Part from a G5 PowerMac

I'm currently reassembling a 2005 G5 2.0 GHz DP, M9747LL/A.

I have the following part but I can't remember where it came from, and I've not documented it in my photos I took during disassembly.

Can anyone help identify it?

Thanks.

Block Image
Block Image
Block Image
Block Image
Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
2 Kommentare

What did you do? That might offer a hint where to look.

von

I did a complete teardown as it was the most filthiest computer I've ever come across.

It was likely removed after the motherboard came out. Maybe somewhere around the HDD holders.

von

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

It's been quite awhile since I've worked on these older systems I keep thinking it's a logic board stand off holding the board off of the side panel (bottom side of logic board). Just behind the PCI slots you should see some holes where the pins and latch tab pass through to secure it.

War diese Antwort hilfreich?

Bewertung 0

2 Kommentare:

I've added two more photos, do you mean in that area?

I realise it's a bit vague, and it is my own fault for not paying enough attention when taking it apart. But I do appreciate everyone's input on this.

von

Found it, it covers a cable on the lower left of the board near the RAM slots.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

David wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 11

Insgesamt: 58