17. Okt 2015
Aktuelle Version von:
bogart
Titel:
My washer stops at the rinse cycle
Original-Beitrag von::
Washer fills, agitates no problem. then the washer will not spin rinse or anything else the washer is done. this is the same on all 3 different cycles. There is no hum like it wants to go or any sound at all. - Timer? Motor? + Timer? Motor? === Update (10/13/2015) === - model 110.20922990. I don't believe it is a clogged drain. Because after you get the + model 110.20922990. I don't believe it is a clogged drain. Because after you get the + timer past the wash cycle on any of the different wash cycles, there is nothing. + Not a buzz not a hum nothing. You can move the dial any place after the end of + the wash cycle and try to start the washer with no luck. You can go to the spin + cycle and try to start the machine no go. You can go back to the wash cycle nand + start it up no problem.
Gerät:
Kenmore 90 Series Washing Machine
Status:
open
13. Okt 2015
Bearbeitet von:
bogart
Titel:
My washer stops at the rinse cycle
Original-Beitrag von::
Washer fills, agitates no problem. then the washer will not spin rinse or anything else the washer is done. this is the same on all 3 different cycles. There is no hum like it wants to go or any sound at all. - Timer? Motor? + Timer? Motor? + + === Update (10/13/2015) === + + model 110.20922990. I don't believe it is a clogged drain. Because after you get the + timer past the wash cycle on any of the different wash cycles, there is nothing. + Not a buzz not a hum nothing. You can move the dial any place after the end of + the wash cycle and try to start the washer with no luck. You can go to the spin + cycle and try to start the machine no go. You can go back to the wash cycle nand + start it up no problem.
Gerät:
Kenmore 90 Series Washing Machine
Status:
open
12. Okt 2015
Original-Beitrag von:
bogart
Titel:
My washer stops at the rinse cycle
Original-Beitrag von::
Washer fills, agitates no problem. then the washer will not spin rinse
or anything else the washer is done. this is the same on all 3 different cycles.
There is no hum like it wants to go or any sound at all.
Timer? Motor?
Gerät:
Kenmore 90 Series Washing Machine
Status:
open