Mein Problem
charging port was missed up...
Meine Reparatur
..
Mein Rat
..
Dieser Artikel ist in deinem Land leider nicht verfügbar.
Artikel-Nr: IF297-018-1
Dieser Artikel ist in deinem Land leider nicht verfügbar.
8,99 $
Im Angebot
Gebrauchte A-Stock Ware ist in ausgezeichnetem Zustand
Als B-Stock deklarierte Ware hat leichte Gebrauchsspuren
Als C-Stock deklarierte Ware hat starke Gebrauchsspuren, ist aber voll funktionstüchtig
8,99 $
Im Angebot
Nicht auf Lager
So viel haben wir leider nicht auf Lager
Artikelbeschreibung
Beschreibung
Beschreibung
Replace a damaged microUSB port on your 2nd generation PS4 DualShock 4 controller.
This charging assembly is only compatible with the second generation DualShock 4 controller, indicated by the part number JDS-011. The best way to determine which version you have is to disassemble your controller and look for the part number.
Find the 1st generation JDS-001 part here.
This is a used OEM part.
Kompatibilität
Kompatibilität
Reparatur-Geschichten
charging port was missed up...
..
..
My ex roommate broke both ps4 controller charging ports from trying to shove the wrong charger into the port... because obviously if it doesn't fit one it may fit the other -_-
It went well... eventually. I had some issues with the stupid trigger buttons and those pesky little springs but I looked up a separate video for that.
I learned that it's important to push the cord from charging port to motherboard aside when closing the controller up because if you don't you may accidentally squeeze it with the screw when you close up which will prevent it from working. So what I did was I just pushed it over the battery and then closed up so it was fine. Also remember for the trigger buttons to make sure the gel part is snapped back into place or your trigger button won't work! It was much easier to do the fix then I thought it was going to be!!
My ex roommate broke both ps4 controller charging ports from trying to shove the wrong charger into the port... because obviously if it doesn't fit one it may fit the other -_-
It went well... eventually. I had some issues with the stupid trigger buttons and those pesky little springs but I looked up . . .
Because it needed to be repaired
Quick and easy
The cheaper way is the better way in my book
Empfohlene Artikel