MacBook Pro 13" Unibody Early 2011 Screws
Grab a toolkit for your MacBook Pro 13" Unibody Early 2011 model and fix a broken laptop!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Kategorie auswählen
- Alle
- Accessories
- Adapters
- Batteries
- Cables
- Case Components
- Verbrauchsmaterialien
- Fans
- Hard Drive Brackets
- Hard Drive Enclosures
- Hard Drives
- Hard Drives (SATA)
- Heat Sinks
- Keyboards
- Logic Boards
- MagSafe Boards
- Memory Maxxer Kits
- Microphones
- Optical Drives
- RAM
- Rubber Feet
- Screens
- Screws
- Speakers
- SSD Upgrade Kits
- SSDs
- Trackpads
- Wireless
Ersatzteile für MacBook Pro 13" Unibody Early 2011:
MacBook Pro Unibody Lower Case Screw Set
Replace a stripped or missing screw securing the lower case of most Unibody model MacBook Pro laptops. The excluded models are the Late 2008 and Early 2009 15" MacBook Pr...
MacBook Pro Unibody Lower Case Screw and Foot Kit
Replace a missing or scuffed plastic foot or a missing screw securing the lower case of most Unibody model MacBook Pro laptops.
MacBook Pro Unibody (Mid 2009-Mid 2012) Trackpad Mounting Screws
Replacement screws and springs for mounting the trackpad in the upper case assembly of your mid 2009 to mid 2012 13" and 15" MacBook Pro Unibody laptop.
MacBook Pro 13" Unibody (Early 2011-Mid 2012) Screw Set
The set includes all the screws except those from the hard drive bracket, display assembly, and trackpad.
Geräteinformation
In February 2011, Apple refreshed the 13" MacBook Pro line by changing to the Intel HD Graphics 3000, increasing VRAM to 384 MB, and upgrading to Core i5 and Core i7 processors with PC3-10600 RAM. The Mini DisplayPort was also replaced (but still backwards compatible) with the new Thunderbolt standard allowing 10 Gbps transfer speeds in both directions.
The most common repairs with the MacBook Pro 13" Unibody for Early 2011 are replacing a dead battery or upgrading the hard drive or RAM. The MacBook Pro 13" Unibody (Early 2011) Memory Maxxer RAM Upgrade Kit includes all the parts and tools you need to upgrade to 16 GB of RAM.
The MacBook Pro 13" Unibody for Early 2011 requires a Tri-point Y0 Screwdriver to remove the battery. The battery kit includes all the needed tools.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 13" Unibody for Early 2011 repair guides for step-by-step instructions on how to make the fix.