Mein Problem
Fan stopped working
Meine Reparatur
Went perfect. Though funny enough the fan started working again the day before my replacement arrived. I replaced it anyway.
Mein Rat
make sure you keep track of your screws
Menü
Deine Einstellungen
Dieser Artikel ist in deinem Land leider nicht verfügbar.
Artikel-Nr: IF162-026-1
Dieser Artikel ist in deinem Land leider nicht verfügbar.
34,99 $
Im Angebot
Gebrauchte A-Stock Ware ist in ausgezeichnetem Zustand
Als B-Stock deklarierte Ware hat leichte Gebrauchsspuren
Als C-Stock deklarierte Ware hat starke Gebrauchsspuren, ist aber voll funktionstüchtig
34,99 $
Im Angebot
Nicht auf Lager
Sofort lieferbar
Nicht auf Lager
Wir senden dir eine E-Mail, sobald der Artikel wieder verfügbar ist.
So viel haben wir leider nicht auf Lager
Artikelbeschreibung
Beschreibung
Beschreibung
Replace a malfunctioning or noisy fan compatible with a mid 2010 or late 2011 model MacBook Pro 17" Unibody laptop.
If your screen is facing you, this is the fan on the right side of the machine.
Looking for the MacBook Pro 17" Unibody (Mid 2010/Early 2011) Left Fan?
Beschreibung
Beschreibung
Replace a malfunctioning or noisy fan compatible with a mid 2010 or late 2011 model MacBook Pro 17" Unibody laptop.
If your screen is facing you, this is the fan on the right side of the machine.
Looking for the MacBook Pro 17" Unibody (Mid 2010/Early 2011) Left Fan?
Kompatibilität
Kompatibilität
Eigenschaften
Eigenschaften
Eigenschaften
Eigenschaften
Kompatibilität
|
|
Reparatur-Geschichten
Fan stopped working
Went perfect. Though funny enough the fan started working again the day before my replacement arrived. I replaced it anyway.
make sure you keep track of your screws
The MacBook Pro 17" would boot to a gray screen or if left alone for a while it would boot, but eventually crash. The area around the GPU memory was warm and the bolts connected to the GPU heatsink were very hot to the touch. Swapped the left fan with the right to see if the fans were working. The fan failed plugged into the left location also.
Simple repair, just remove the bottom plate, unscrew the fan and gently pop the power connector off. Installation is the reverse. Plus a lot of dust cleaning.
Expect to clean out a lot of dust.
The MacBook Pro 17" would boot to a gray screen or if left alone for a while it would boot, but eventually crash. The area around the GPU memory was warm and the bolts connected to the GPU heatsink were very hot to the touch. Swapped the left fan with the right to see if the fans were working. The f . . .
One day my MacBook Pro started rattling very loudly whenever the fans came on. It was very annoying and got in the way of my work.
It took me about a half hour to complete the repair, except that I had to run out to get a new screwdriver in the middle of the repair. The repair described in the manuals said I would need a phillips screwdriver. But the screws that held down the fans in my MacBook Pro were actually a very small Torx screw (a star hole in the head). I had to get one since it was a very unusual screwdriver to have. Once I had that, the repair went very smoothly after that.
Check to make sure which screws are actually holding down the fans - Torx or Phillips and get the right screwdriver.
One day my MacBook Pro started rattling very loudly whenever the fans came on. It was very annoying and got in the way of my work.
It took me about a half hour to complete the repair, except that I had to run out to get a new screwdriver in the middle of the repair. The repair described in the manu . . .