Prying and Opening Tool Assortment

  • Prying and Opening Tool Assortment
Prying and Opening Tool Assortment

9,99 $

9,99 $

Wir senden dir eine E-Mail, sobald der Artikel wieder verfügbar ist.

Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

Schau dich im Store um

Artikelbeschreibung

Beschreibung

Beschreibung

This tool assortment includes the most sought after Picks, Spudgers, Prying Tools, and more for electronics opening and component manipulation.

Includes:

Reparatur-Geschichten

Nutzeravatar
John Fitzgerald's Story Photo #1310284

Mein Problem

The back button on my phone was operating as if it was being pressed randomly.

Meine Reparatur

I've replaced the camera before (thanks to Ifixit), so the disassembly went smoothly.

Mein Rat

Because it isn't specifically in the guide, there are a couple of small pieces (I think a speaker cover and the vibrator (for lack of a . . .

Nutzeravatar

Mein Problem

The microphone had stopped working on my wife's first gen Pixel phone and warranty had lapsed about a month before.

Meine Reparatur

Repair went pretty smoothly. Don't have a microwave so couldn't use the iOpener gel tube that came with repair kit (tried putting it in hot water but didn't really work) so used hair dr . . .

Nutzeravatar

Mein Problem

My battery was at times barely lasting for half the day. It would randomly shut down even while displaying a reasonable amount of power remaining. Processor slowdown is real and painful.

Meine Reparatur

Removing the adhesive on the battery was the most difficult part. The tabs ripped as soon as I tugged on them, . . .

Nutzeravatar

Mein Problem

My phone still works great, but the battery was so old that it just wouldn't hold a decent charge anymore. The phone was not designed for the battery to be user-replaceable.

Meine Reparatur

IFixIt assured me of how to go about it. I researched online and finally found a reputable replacement battery supplier, and I . . .

Nutzeravatar

Mein Problem

Extend the life and keep these material out of landfill or contamination of other natons..

Meine Reparatur

Perfect.

Mein Rat

Not too hard, go for it!

Nutzeravatar

Mein Problem

My friend dropped my op1 and the red encoder hit the edge of the table. After the fall the red encoder only worked when holding pressure to the right and then spinning the encoder. Otherwise it would not register when turning it normally. I thought it just might be a mechanical issue but was not sur . . .

Mehr anzeigen