Replace corroded, bent, or missing contact wires or a missing retaining flap with a new digitizer cable FPC connector J3010 or J3011 in an iPad 2, 3, or 4 and save a logic board from e-waste.
The digitizer cable is inserted into two of these cable connectors that are surface soldered to the edge of the logic board.
This part includes one FPC connector.
- iPad 2nd Gen A1395, A1396, and A1397
- iPad 3rd Gen A1416, A1430, and A1403
- iPad 4th Gen A1458, A1459, and A1460
This part requires microsoldering and board level repair skills. If you don’t know what this means you may not have the knowledge or tools to install this part. If you’re curious and want to know more about getting into microsoldering, here’s some good reading and some good watching to get you started.
Are you learning to microsolder or starting your own board level repair business? This component is included in the Board Component Bundle.
|iPad 2 CDMA||
|iPad 2 GSM||
|iPad 2 Wi-Fi EMC 2415||
|iPad 2 Wi-Fi EMC 2560||
|iPad 3 4G||
|iPad 3 Wi-Fi||
|iPad 4 CDMA||
|iPad 4 GSM||
|iPad 4 Wi-Fi||
6 weitere Geräte zeigen