iPad Pro 12.9" Wi-Fi/Cellular Microsoldering
Ersatzteile für iPad Pro 12.9" Wi-Fi/Cellular:
iPad Pro 12.9" Display Cable
Replace the flex cable that connects the display daughter board to the logic board of a 12.9" model iPad Pro. This part requires micro soldering.
iPad Pro 12.9" (Cellular) Lightning Connector
Replace the lightning connector and its cable for a 12.9 inch cellular model iPad Pro. This part requires micro soldering.
The iPad Pro was announced on September 9th alongside the iPhone 6s/6s Plus, and launched on November 11 of the same year. Featuring a 12.9-inch, 264 ppi display and a self-balancing four-speaker array, the Pro is the largest iOS device yet, targeted towards media professionals looking to replace traditional laptops.
iPad Pro has two feature accessories, the Apple Pencil and Smart Keyboard. The Pencil is a stylus that enables drawing directly to the screen with high-precision pressure sensitivity. The Smart Keyboard is a full-sized keyboard that connects to the iPad via the Smart Connector. It has the same dome switches used in the 2015 Macbook.
The most common repairs for the 12.9 inch iPad Pro are replacing a cracked front glass screen or a dead battery. The iPad Pro 12.9" front glass panel is held to the aluminum case with strips of adhesive. Once the device is opened, this adhesive will need to be replaced.
The iPad Pro 12.9" earned a 3 out of 10 in iFixit's repairability assessment. Watch the Teardown Review for more: