Von Studierenden verfasstes Wiki
Ein tolles Team von Studierenden aus unserem Bildungsprogramm hat dieses Wiki erstellt.
Der Lautsprecher geht nicht an, obwohl er eingesteckt ist
Mein Gerät ist eingesteckt, geht allerdings nicht an.
Meine Ladeschale funktioniert nicht mehr
Die Ladekontakte könnten verschmutzt sein. Diese müssten dann gesäubert werden. Säubere die Kontakte in der oberen Ecke der Ladeschale und des Lautsprechers mit einem Wattestäbchen, der z.B. in Reinigungsalkohol getränkt ist. Sollte das nicht funktionieren, könnte das Problem an der Schale selbst liegen. Diese müsste dann ausgetauscht werden.
Mein Ladekabel funktioniert nicht
Stelle sicher, dass das Ladekabel sowohl im Wandanschluss als auch in der Ladeschale sicher eingesteckt sind. Versuche das USB Kabel mit einem sicher funktionierenden Kabel auszutauschen, wenn der Lautsprecher nicht an gehen sollte.
Der Lautsprecher geht im Akkumodus nicht an
Mein Gerät geht nicht an, wenn er nicht mit dem elektrischen Ladekabel verbunden ist.
Der Akku ist nicht ausreichend geladen
Um den Ladezustand zu testen, kannst du den Power Button drücken, halten und das Akkulämpchen beobachten. Sollte das Lämpchen rot blinken, könnte es sein, dass der Akku nicht genug Ladung hat, um das Gerät anzuschalten. Stecke die Ladeschale an eine Steckdose an, um den Akku zu laden. Das Akkulämpchen wird während des Ladevorganges gelb leuchten und geht aus, wenn der Ladevorgang abgeschlossen ist.
Der Lautsprecher befindet sich im Akku-Sicherheits-Modus
Sollte der Lautsprecher eingesteckt sein und für mehr als 14 Tage ungenutzt bleiben, geht das Gerät in den Akku-Sicherheits-Modus, um die Akkuleistung zu erhalten. Um den Lautsprecher zu reaktivieren, schließe ihn an eine Steckdose an. Du kannst den Lautsprecher sofort nutzen, während er lädt.
Fehlerhafter Akku
Sollte das Akkulämpchen nach zehn Stunden weiterhin gelb leuchten, muss der Akku möglicherweise ausgetauscht werden.
Der Lautsprecher verbindet sich nicht via Bluetooth
Der Lautsprecher geht an, verbindet sich allerdings nicht via Bluetooth.
Das Gerät befindet sich außer Reichweite
Im Durchschnitt funktioniert der Lautsprecher ca. 9 Meter vom Bluetoothgerät entfernt noch. Wände und verschiedene Baumaterialien können den Empfang beeinflussen. Versuche näher an das Gerät zu gehen, um die Verbindung zu ermöglichen.
Zu viele Geräte sind mit dem Lautsprecher verbunden
Der Lautsprecher kann nur acht Bluetoothgeräte in seinem Speicher aufnehmen und sich nur mit zweien simultan synchronisieren. Stelle sicher, dass nicht zwei Geräte gleichzeitig mit dem Lautsprecher verbunden sind. Um den Speicher des Gerätes zu löschen kannst du den Bluetooth Knopf für ca. 10 Sekunden drücken und gedrückt halten. Das Gerät wird dann sagen, dass die Bluetoothgeräteliste gelöscht wurde, wenn der Vorgang erfolgreich war. Um ein neues Bluetooth Gerät zu verbinden kannst du den Bluetooth Knopf drücken und festhalten, bis das jeweilige Funktionslicht blau blinkt. Dann kannst du den Lautsprecher mit dem Bluetooth Gerät suchen.
Fehlerhaftes Bluetooth Modul
Sollte das Gerät innerhalb der Bluetoothreichweite sein und die Speicherliste nicht voll sein, könnte es sein, dass das Bluetoothmodul fehlerhaft ist und ersetzt werden muss.
Die Knöpfe funktionieren nicht
Die Knöpfe reagieren nicht, wenn sie gedrückt werden.
Fehlerhaftes Bedienpanel
Sollten die Knöpfe des Gerätes nicht funktionieren, obwohl andere Gerätefunktionen wie z.B. die Lautstärkeregelung über das verbundene Bluetoothgerät gesteuert werden können, könnte das Bedienpanel nicht mehr funktionieren und einen Austausch nötig machen.
Verzerrter/Kein Sound kommt aus dem Gerät
Mein Gerät liefert keinen guten Sound.
Das Gerät verbindet sich nicht richtig
Stelle sicher, dass der Lautsprecher gut mit dem Bluetoothgerät verbunden ist. Um ein neues Bluetoothgerät zu verbinden kannst du den Bluetoothknopf drücken und halten, bis das Kontrolllämpchen blau blinkt. Danach kannst du von deinem Bluetoothgerät aus nach dem Lautsprecher suchen.
Der Lautsprecher oder das Bluetoothgerät sind stumm geschaltet
Stelle sicher, dass der Lautsprecher und das Bluetoothgerät nicht stumm geschaltet sind. Versuche die Lautstärke sowohl am Lautsprecher, als auch an deinem Bluetooth Gerät lauter zu stellen.
Defekte Lautsprecher
Sollte Audio zu hören, der Ton allerdings verzerrt sein, stelle sicher, dass die Lautsprecher nicht blockiert sind. Sollten die Lautsprecher nicht blockiert sein, könnten die Lautsprecher defekt sein. Ein Austausch ist in diesem Fall notwendig.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
40 Kommentare
Speaker is charged but will not turn on. When it is on charge there is a red light on the on/off button
pobelo - Antwort
I've got the same problem, any idea how to fix it?
adeavgal -
I have the same problem the anyone knows how to fix it
Reno Alzaga -
I have a same problem. Anyone help plsss
Osman ALTINTOP -
Me too have a same problem.. When it is on charge there is a red light on the on/off button
zahir6 - Antwort
Connection unsuccessful. Error message" Make sure Bose Mini II Soundlink is turned on and in range. It is on and says ready to pair. What can I do?
Robert Ekblom - Antwort
I connected to my device after clearing my Bluetooth list. Thank you very much!!!
Vergil Clark - Antwort
My speaker will not turn off and continually gives out the battery low voice command-totally frustrating!!! You can't even turn off the voice command using the instructions.
Phillip - Antwort
Battery light remains red. Goes out when unplugged from charger.
Bob Humphreys - Antwort
Battery light remains static red. Goes out when unplugged. Battery will not charge.
Bob Humphreys - Antwort
When I hold the Bluetooth button for 10 seconds, it makes a noise, but does not say “Bluetooth list cleared". Now the Bluetooth button is stuck flashing blue, even when I turn the speaker on and off and it won't connect to any of my devices
John Lennon - Antwort
mine is doing the same
Nick Sanders -
The red light above the power button flickers quickly. The speaker doesn’t charge and cannot be used either plugged or unplugged
Kheemo69@gmail.com Knowles - Antwort
The battery power light flashes red and doesn’t charge.
Kheemo69@gmail.com Knowles - Antwort
Speaker makes an audible noise/tone when charging + plugged in via aux cable. The noise goes away if I unplug the charging dock or cable.
derek - Antwort
Speaker stops playing music randomly while connected to my win10 laptop (lenovo y40 2730). It still shows as connected under bluetooth settings on my pc. Sometimes before stopping, the sound flickers , it is only 3 feet from my laptop. I have the latest bluetooth drivers and speaker firmware. Please help!
akali babbar - Antwort
Hi im not sure if my soundlink mini 2 is not that loud even with a max volume how would i know if there is a problem is this normal?
Alec - Antwort
Poor or no sound coming from Mini Bose 2
Claudius DelFiacco - Antwort
I was able to reset the speaker by holding down Bluetooth button for 10seconds. Then I had to go into my phone settings then Bluetooth settings and “forget this device”. I then turned off then on Bluetooth again, on my phone, and my Bose speaker was able to reconnect.
h_bjean - Antwort
My speaker says”ready to pair”. But it doesn’t. It was working fine until two days ago. Today, I found out all the pairs had been cleared and can’t pair it again.
kaorukojazz - Antwort
The speakers don’t appear to be balanced. Not all of the vocals and instruments can be heard or are partially muted. I can play loud but cannot seem to get the proper speaker balance coming out of the device.
resull - Antwort
My speaker is not charging, same problem before I brought it to bose authorized repair shop they said software problem. I dont know why? Now same problem not charging.
Frax Caunca - Antwort
The speaker will not turn on even though its been plugged in by a bose adaptor for more than 10 hours. A yellow indicator flashes once when plugged in then doesn't respond. I've tried troubleshooting and updating but it would not respond to the computer. Trying the multifunction procedure right now. Fingers crossed the battery doesn't need replacing.
daniellee8688 - Antwort
Did you solve it? I have the exact same issue
Per Johansson -
Hello all, my new soundlink mini 2s sound is terrible no depth of power,treble is non existant as is the bass. Is is me or is this how it is. Any help please Paul
Paul Smith - Antwort
I just bought bose soundlink mini 2 SE ten days ago. This morning I found my soundlink mini 2 was unable to turn on with battery. It work when I plug it in power charger, but the sound is terrible.
Please help.
Meidian Prima - Antwort
The first comment here is exactly my problem. My mini 2 has no charge. And when attached to the Bose charger it has a steady red light above the power button but still has no charge and will not charge. It has the latest update. I can’t reinstall the update because again the speaker has no charge. I’ve tried the two different resets. This is the third time this speaker has died for various reasons. With so many people with the same problem there must be someone who has found a solution. Ideas?
JEZ - Antwort
When blue light comes on I try to pair and says unsuccessful on my phone blue light goes off. I’ve reset it but makes no difference.
Richard - Antwort
button power, aux , and bluetooth…blinking yellow…
cannot be turned on..always blinking yellow of three button.
connect to laptop, not responds..
Rock 01092004 - Antwort
I have a problem of not connected to Bluetooth. I tried to hold button for so many second but still result is same. No voice for listed clreaed and no sign for connection.
Jk Dawani - Antwort
My Bose SoundLink Mini LLC speaker has terrible low range bass distortion.
any comments on how to adjust.
djswaintek - Antwort
My mini 2 has been sitting a while in the cold in the garage. It won’t charge. When plugged in the charge power the red light comes on and that’s all. If I hold the multi function button for 10 seconds it flashes yellow. If I unplug it, then back in it goes red again….
any suggestions please?
Bryan ward - Antwort
mine was in cold garage couple of years. now red solid light. wont reset by any method. multi button makes it flash yellow then back to red solid. same as yours. cant find answers here. looks like it might be gone.
ken shelton -
Can anyone fix it I get a orange light with an intermitting beep nothing else
Louis Jacks - Antwort
was having an issue where that bluetooth totes quit connecting - Forgot it from my phone, no good - cleared the memory list on the speaker to no avail - fully reset the speaker by powering on & then holding down the power button til it stated “pick a language..” & then had no prob for phone to recognize & reconnected easy peasy - mine is many yrs old & i thought perhaps was a bad bluetooth in the speaker ‘cause would not connect w/ anything else either … i think it got confused one day when turned on & it didnt know which device to go to (wife’s cpu or my phone) while both were in operation simultaneously … anyway, hope this helps
james davison - Antwort
redlight continues to flash even after doing updates it worked for about 2 hours after software updates but went back to a red flashing light.
what else should i do besides buying a new device?.
Mercedes Padron Dash - Antwort
Checking to see if I could send it back I did all the troubleshooting and it will not charge
Tommy Mcvean - Antwort
my Bose mini would break up got worse and worse. Now no sound at all
Mary, Ed Goski - Antwort
my sound on and off to my speaker ...how can i fix this please
cherian tapilot - Antwort
My speaker just shows a blinking RED light, whether it's on the charging pad/plugged in to a wall socket or connected to my laptop.
Any help would be appreciated!
Kenneth Betbeze - Antwort