Zum Hauptinhalt wechseln

Samsung Galaxy S8+のバックガラスの交換

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 5 Anleitungen, die diese beinhalten.

Englisch
Japanisch

Schritt 11 übersetzen

Schritt 11
Samsung Galaxy S8+ Back Glass Replacement: Schritt 0, Bild 1 von 1
  • Remove the back cover.

  • To install a new back cover:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • To reinstall the back cover, or to install a back cover without pre-installed adhesive, follow this guide.

  • Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.

  • If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.

  • You may also need to transfer the camera bezel to your new part. If that's the case, follow our camera bezel replacement guide.

バックカバーを取り出します。

新しいバックカバーをインストールするには:

ピンセットを使って、バックカバー両面とデバイスケースに付いた接着剤の残りを綺麗に剥がします。それから高濃度イソプロピルアルコール(90%以上)と糸くずの出ないリントフリーの布で綺麗に拭き取ります。新しい接着剤を使用するための表面の準備が完了します。

デバイスの電源を入れて、修理の成果をテストしてください。それから新しい接着剤を装着して、デバイスの本体を組み立てます。

バックカバーを再装着する際、もしくは事前に装着された接着剤なしのバックカバーを装着する場合は、こちらのガイドを参照してください。

デバイスの電源を入れて、修理結果をテストしてください。それから新しい接着剤を装着して、デバイス本体を組み立てます。

希望に応じて、バックカバーに接着剤を装着しなくても組み立てることができます。大きな接着剤の塊を取り除くとバックカバーがぴったりと閉じます。装着が終わったらバックカバーを温めて圧力でシールをします。防水性はありませんが、この接着剤の役割は防水機能を目的に固定する以上の力があります。

カメラのベゼルを新しいパーツに移植する必要があるかもしれません。該当する場合は、こちらのカメラベゼルの交換ガイドを参照してください。

[* black] Remove the back cover.
[* icon_reminder] To install a new back cover:
- [* black] Use tweezers to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive.
+ [* black] Use [product|IF145-020|tweezers] to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive.
[* black] Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.
[* icon_reminder] To reinstall the back cover, or to install a back cover without pre-installed adhesive, [guide|124003|follow this guide|new_window=true].
[* icon_note] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.
[* icon_note] If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.
[* icon_reminder] You may also need to transfer the camera bezel to your new part. If that's the case, follow our [guide|123030|camera bezel replacement guide|stepid=237617|new_window=true].

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.