Zum Hauptinhalt wechseln

任天堂Switch的散热片的更换

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 14 Anleitungen, die diese beinhalten.

Englisch
Chinesisch

Schritt 3 übersetzen

Schritt 3
Nintendo Switch Heat Sink Replacement: Schritt 0, Bild 1 von 3 Nintendo Switch Heat Sink Replacement: Schritt 0, Bild 2 von 3 Nintendo Switch Heat Sink Replacement: Schritt 0, Bild 3 von 3
  • Use a spudger or your fingers to lift the heatsink up and off the motherboard to remove it.

  • You may feel a bit of resistance. This is normal, since the heat sink is slightly bonded to the CPU with thermal paste.

  • Clean off the old thermal paste from the heat sink and CPU using high-concentration (90% or higher) isopropyl alcohol and a microfiber cloth. Apply new thermal paste to the CPU before reassembly.

  • Apply thermal paste to all surfaces that had thermal paste applied previously. This includes between the heatpipe and aluminum shield, which the Switch uses as additional heatsinking.

用撬棒或手指将散热器提起并从主板上卸下,以将其卸下。

你可能会感到有些抵触。这是正常现象,因为散热器会通过散热胶与CPU轻微粘合。

使用高浓度(90%或更高)的酒精和超细纤维布清除散热器和CPU上的旧散热膏。重新组装前,请在CPU上涂抹新的散热膏

将散热膏均匀地涂在之前涂过的位置。这包括散热管和铝合金屏蔽罩之间,Switch用来额外散热的那个地方。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.