Zum Hauptinhalt wechseln

Reemplazo de pantalla del Samsung Galaxy A3 (2017)

Englisch
Spanisch
Schritt 2
Samsung Galaxy A3 (2017) Display Replacement: Schritt 0, Bild 1 von 1
  • Prepare an iOpener and apply it to the display for at least two minutes to loosen the adhesive beneath.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of clear packing tape over the display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

Prepara un iOpener y aplícalo en la pantalla durante al menos dos minutos para aflojar el adhesivo que se encuentra debajo.

Es posible que debas recalentar y volver a aplicar el iOpener varias veces para que el teléfono esté lo suficientemente caliente. Siga las instrucciones de iOpener para evitar el sobrecalentamiento.

Si el cristal de la pantalla está agrietado, mantenga contenidas las roturas y evita daños corporales durante su reparación colocando una cinta sobre el cristal.

Coloca tiras superpuestas de cinta de embalaje transparente sobre la pantalla hasta que se cubra toda la cara.

Esto mantendrá los fragmentos de vidrio contenidos y proporcionará integridad estructural al levantar y levantar la pantalla.

Usa gafas de seguridad para proteger tus ojos de cualquier vidrio que se mueva libremente durante la reparación.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.