Zum Hauptinhalt wechseln

iPhone X, XS 및 XS Max 배터리 접착 스트립 교체

Englisch
Koreanisch

Informationen zur Anleitung

= Fertig = Unvollständig
iPhone X, XS, and XS Max Battery Adhesive Strips
iPhone X, XS, and XS Max"L-Shaped" Battery Adhesive Strips Replacement
    Use this guide to correctly apply replacement battery adhesive strips for "***L-shaped***" iPhone batteries, including the dual-cell batteries in the iPhone X and XS Max, and the single-cell battery in the iPhone XS. AnytimeUse the list below to check if your phone is compatible.

    If your replacement battery doesn't come with adhesive strips pre-installed, or
    you remove the're reusing your existing battery, these strips must be replaced. The strips are easily damaged if not applied correctly, so you may want to have a spare set of strips on hand when following this guide for the first time.
    These adhesive strips are different from those in prior-generation iPhones due to the presence of the wireless charging coil. The coil lies directly underneath the battery, which is secured with four adhesive strips that are contoured around the coil to avoid damaging it.
    Before you begin, you should have removed the battery by following a guide like the ones linked below:
    * [guide|103390|iPhone X Battery Replacement]
    * [guide|117346|iPhone XS Battery Replacement]
    * [guide|117345|iPhone XS Max Battery Replacement]
    * [guide|127686|iPhone 11 Pro Battery Replacement]
    * [guide|128034|iPhone 11 Pro Max Battery Replacement]
    * [guide|141661|iPhone 12 Pro Max Battery Replacement]
    * [guide|146608|iPhone 13 Pro Battery Replacement]
    * [guide|146610|iPhone 13 Pro Max Battery Replacement]
    * [guide|152973|iPhone 14 Pro Battery Replacement]
    * [guide|153006|iPhone 14 Pro Max Battery Replacement]
    To replace the battery adhesive strips in a different model iPhone, use one of the following guides:
    * [guide|107792|iPhone 5s, 5c, and SE Battery Adhesives Strips Replacement]
    * [guide|56465|iPhone 6, 6 Plus, 6s, 6s Plus, 7, and 7 Plus Battery Adhesive Strips Replacement]
    * [guide|103936|iPhone 8, 8 Plus, and XRRectangular Battery Adhesive Strips Replacement]
      To reassemble your iPhone, return to the guide you used to remove the battery and follow the remaining steps in reverse order.
      * [guide|103390|iPhone X Battery Replacement]
      * [guide|117346|iPhone XS Battery Replacement]
      * [guide|117345|iPhone XS Max Battery Replacement]
      * [guide|127686|iPhone 11 Pro Battery Replacement]
      * [guide|128034|iPhone 11 Pro Max Battery Replacement]
      * [guide|141661|iPhone 12 Pro Max Battery Replacement]
      * [guide|146608|iPhone 13 Pro Battery Replacement]
      * [guide|146610|iPhone 13 Pro Max Battery Replacement]
      * [guide|152973|iPhone 14 Pro Battery Replacement]
      * [guide|153006|iPhone 14 Pro Max Battery Replacement]
      Remember to take your old battery to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].

      Anleitungsschritte

      1. Schritt

      시작하기 전에 iPhone에 새 배터리를 시험삼아 끼워보는 것이 좋습니다.

      2. Schritt

      배터리가 잘 끼워지면 배터리를 다시 꺼내서 작업대에 놓으세요 (커넥터 접점을 위로 향하게).

      3. Schritt

      새 접착 스트립 세트에서 파란색 플라스틱 라이너를 벗기고 버려주세요.

      4. Schritt

      접착제가 배터리에 붙으면 벗기거나 위치를 바꿀 수 없습니다—실수한 경우 새로운 접착 스트립을 사용하여 처음부터 다시 시작해야 합니다.

      5. Schritt

      손가락이나 천을 사용하여 스트립을 배터리 제위치에 꼭 븉이세요.

      6. Schritt

      배터리 가장자리를 따라 손가락 끝을 굴려 각 접착 스트립 끝의 검정색 당김 탭을 붙이세요.

      7. Schritt

      분홍색 라이너를 벗겨서 버리고 접착 스트립을 완전히 드러내세요.

      8. Schritt

      배터리를 설치할 때 iPhone 상단 ("노치" 영역) 가장자리에 위치한 Face ID 카메라 및 센서 하드웨어를 건드리지 않도록 주의하세요.

      9. Schritt

      배터리를 접착 스트립에 단단히 눌러 제자리에 고정시키세요.

      Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.