Zum Hauptinhalt wechseln

MacBook Pro 13" Two Thunderbolt Ports Late 2020 트랙패드 교체

Englisch
Koreanisch

Grundständige Anleitungen

Bevor diese Anleitung als vollständig übersetzt gilt, müssen alle grundständigen Anleitungen übersetzt werden.

MacBook Pro 13" Two Thunderbolt Ports Late 2020 하단 케이스 교체

배터리 분리

Informationen zur Anleitung

= Fertig = Unvollständig
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some basic [[Troubleshooting Problems After a Repair|troubleshooting|new_window=true]] or search our [link|https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Two%20Thunderbolt%20Ports%202020|Answers community] for help.

      Anleitungsschritte

      1. Schritt — 트랙패드 커넥터 나사 풀기

      T5 Torx/톡스 드라이버를 사용하여 트랙패드 케이블 커넥터 브래킷을 고정하는 1.9mm 나사 두 개를 풀어주세요.

      2. Schritt

      트랙패드 케이블 커넥터 브래킷을 분리하세요.

      3. Schritt

      Spudger/스퍼저를 사용하여 로직 보드에서 커넥터를 조심히 똑바로 들어 올려 트랙 패드 리본 케이블을 분리하세요.

      4. Schritt

      iOpener를 준비하여 약 일 분 동안 트랙패드 리본 케이블 위에 놓고 트랙패드 리본 케이블을 배터리 상단에 고정하는 접착제를 부드럽게 하세요.

      5. Schritt

      트랙패드 리본 케이블을 배터리에서 조심히 벗기고 밀어내세요.

      6. Schritt

      T5 Torx/톡스 드라이버를 사용하여 트랙패드 어셈블리를 고정하는 나사 열 개를 분리하세요:

      7. Schritt

      트랙패드 어셈블리를 분리하세요.

      Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.