MacBook Pro 13" Two Thunderbolt Ports Late 2020 Lower Case Replacement

1. Schritt — Remove the lower case

Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.

2. Schritt

Apply a suction handle to the lower case near the front-center area of the MacBook Pro.

3. Schritt

Insert one corner of an opening pick into the space between the lower case and the chassis.

4. Schritt

Repeat the previous step on the opposite side, sliding your opening pick under the lower case and up the side to pop the second clip free.

5. Schritt

Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.

6. Schritt

Pull the lower case firmly towards the front of the MacBook (away from the hinge area) to separate the last of the clips securing the lower case.

7. Schritt

Remove the lower case.