Zum Hauptinhalt wechseln

MacBook Pro 13" Two Thunderbolt Ports Late 2020 Lower Case Replacement

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 10 Anleitungen, die diese beinhalten.

Englisch
Englisch

Schritt 1 übersetzen

Schritt 1
MacBook Pro 13" Two Thunderbolt Ports Late 2020 Lower Case Replacement, Remove the lower case: Schritt 0, Bild 1 von 1
Remove the lower case
  • Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.

  • If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.

  • Completely power off and unplug your MacBook before you start. Close the display and flip the entire laptop upside-down.

  • Use a P5 Pentalobe driver to remove the six screws securing the lower case:

  • Two 6.8 mm screws

  • Two 5.3 mm screws

  • Two 3.4 mm screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.

If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.

Completely power off and unplug your MacBook before you start. Close the display and flip the entire laptop upside-down.

Use a P5 Pentalobe driver to remove the six screws securing the lower case:

Two 6.8 mm screws

Two 5.3 mm screws

Two 3.4 mm screws

Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.