Zum Hauptinhalt wechseln

Procedimiento de apertura (1.ª y 2.ª generación)

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 8 Anleitungen, die diese beinhalten.

Englisch
Spanisch
Schritt 6
Opening Procedure (1st and 2nd Gen), Insert an opening pick: Schritt 0, Bild 1 von 3 Opening Procedure (1st and 2nd Gen), Insert an opening pick: Schritt 0, Bild 2 von 3 Opening Procedure (1st and 2nd Gen), Insert an opening pick: Schritt 0, Bild 3 von 3
Insert an opening pick
  • If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken display.

  • Apply a suction handle to the right edge of the display, about 5 cm from the bottom edge.

  • Pull up on the suction handle with firm, constant pressure to create a gap just small enough to insert an opening pick.

  • Only create a gap small enough to insert an opening pick. Overbending the screen will damage it.

  • Insert the tip of an opening pick into the gap.

  • Don't insert the opening pick more than 5 mm or you'll damage the LCD.

Si la pantalla está muy agrietada, cubrirla con una capa de cinta de embalaje transparente puede permitir que la ventosa se adhiera. Alternativamente, se puede usar cinta adhesiva muy fuerte en lugar de la ventosa. Si todo lo demás falla, puedes pegar la ventosa a la pantalla rota.

Aplica una manija de succión al borde derecho de la pantalla, a unos 5 cm del borde inferior.

Tira hacia arriba del mango de succión con presión firme y constante para crear un espacio lo suficientemente pequeño como para insertar una púa de apertura.

Solo crea un espacio lo suficientemente pequeño como para insertar una púa de apertura. Doblar demasiado la pantalla la dañará.

Inserta la punta de una púa de apertura en el espacio.

No insertes la púa de apertura más de 5 mm o dañarás la pantalla LCD.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.