Zum Hauptinhalt wechseln

Procedimiento de apertura (1.ª y 2.ª generación)

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 8 Anleitungen, die diese beinhalten.

Englisch
Spanisch
Schritt 7
Opening Procedure (1st and 2nd Gen), Separate the right edge adhesive: Schritt 0, Bild 1 von 3 Opening Procedure (1st and 2nd Gen), Separate the right edge adhesive: Schritt 0, Bild 2 von 3 Opening Procedure (1st and 2nd Gen), Separate the right edge adhesive: Schritt 0, Bild 3 von 3
Separate the right edge adhesive
  • Insert a new opening pick in the gap you just created.

  • Slide the pick along the right edge to separate the adhesive.

  • When sliding near the volume buttons, don't insert the pick more than 2 mm or you'll damage the screen magnets.

  • Leave the pick in the top right corner to prevent the adhesive from re-sealing.

Inserta una nueva púa de apertura en el espacio que acabas de crear.

Desliza la púa a lo largo del borde derecho para separar el adhesivo.

Al deslizarlo cerca de los botones de volumen, no insertes la púa más de 2 mm o dañarás los imanes de la pantalla.

Deja la púa en la esquina superior derecha para evitar que el adhesivo se vuelva a sellar.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.