Zum Hauptinhalt wechseln

Display Assembly

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen auch die Anleitung, die diese beinhaltet.

Englisch
Niederländisch
Schritt 8
Display Assembly, Insert an opening pick: Schritt 0, Bild 1 von 3 Display Assembly, Insert an opening pick: Schritt 0, Bild 2 von 3 Display Assembly, Insert an opening pick: Schritt 0, Bild 3 von 3
Insert an opening pick
  • While holding down the corners of the iPad, repeatedly pull up on the screen, then ease it back down to weaken the adhesive. This will eventually create a small gap in the seam.

  • If the edge cools down during the pulling process, reheat the edge with an iOpener before proceeding.

  • Once you've created a small gap, insert the tip of an opening pick into the gap.

  • Don't insert your opening pick deeper than 3–4 mm, or you risk permanently damaging the display panel.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.