Zum Hauptinhalt wechseln

Bobina de Carga Inalámbrica y Altavoz del Samsung Galaxy S23 Ultra

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 9 Anleitungen, die diese beinhalten.

Englisch
Spanisch
Schritt 2
Samsung Galaxy S23 Ultra Wireless Charging Coil and Loudspeaker Replacement, Disconnect the NFC antenna and charging coil: Schritt 0, Bild 1 von 3 Samsung Galaxy S23 Ultra Wireless Charging Coil and Loudspeaker Replacement, Disconnect the NFC antenna and charging coil: Schritt 0, Bild 2 von 3 Samsung Galaxy S23 Ultra Wireless Charging Coil and Loudspeaker Replacement, Disconnect the NFC antenna and charging coil: Schritt 0, Bild 3 von 3
Disconnect the NFC antenna and charging coil
  • Use the pointed end of a spudger to pry and disconnect the NFC antenna press connector from the motherboard.

  • Repeat for the wireless charging coil press connector.

  • To re-attach press connectors, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

Usa el extremo puntiagudo de un spudger para hacer palanca y desconectar el conector de presión de la antena NFC de la placa base.

Repite para el conector de presión de la bobina de carga inalámbrica.

Para volver a conectar los conectores de presión, alinea con cuidado y presiona hacia abajo en un lado hasta que encaje en su lugar, luego repite en el otro lado. No presiones hacia abajo en el medio. Si el conector está desalineado, las clavijas pueden doblarse y causar daños permanentes.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.