Repariere deine Sachen Community Store

iPhone 16 Pro Max スクリーンの交換

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen auch die Anleitung, die diese beinhaltet.

Zurück zur Anleitung
Englisch
Japanisch
Schritt 10
iPhone 16 Pro Max Screen Installation, Reconnect the screen: Schritt 0, Bild 1 von 2 iPhone 16 Pro Max Screen Installation, Reconnect the screen: Schritt 0, Bild 2 von 2
Reconnect the screen

  • Use your finger to press down and connect the display connector.

  • To re-attach wide press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

  • Press down and connect the front sensor connector.

  • Align the connector carefully over its socket and press down with your fingertip until it clicks into place. Don't try to force the connector into place. If you're having trouble, reposition it and try again.

  • This is a good time to power on your iPhone and test all functions before you seal it up. Be sure to power your iPhone back down completely before you continue.

  • If your iPhone doesn't turn on, connect it to a power source and try again.

スクリーンの取り外し

スパッジャーの先端を使って、ディスプレイのプレスコネクターをこじ開けて外します。

フロントセンサーのプレスコネクタも同様の作業を繰り返します。

再組み立ての際、コネクターをソケットの上に慎重に位置合わせをして、指先でまず片側を、次にもう片側を、カチッと装着音がするまで押し下げます。無理に押し込もうとしないでください。問題がある場合は、コネクタの位置を変えてからもう一度やり直してください。

-[title] Disconnect the screen
-[* black] Use the tip of a spudger to pry up and disconnect the display [guide|25629|press connector|stepid=70308|new_window=true].
-[* black] Repeat for the front sensor press connector.
-[* icon_reminder] During reassembly, align the connector carefully over its socket and press down with your fingertip—first on one side, then the other—until it clicks into place. Don't try to force the connector into place. If you're having trouble, reposition it and try again.
+[title] Reconnect the screen
+[* black] Use your finger to press down and connect the display connector.
+ [* icon_note] To re-attach [guide|25629|wide press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
+[* black] Press down and connect the front sensor connector.
+ [* icon_note] Align the connector carefully over its socket and press down with your fingertip until it clicks into place. Don't try to force the connector into place. If you're having trouble, reposition it and try again.
+[* icon_note] ***This is a good time to power on your iPhone and test all functions before you seal it up. ***Be sure to power your iPhone back down completely before you continue.
+ [* icon_note] If your iPhone doesn't turn on, connect it to a power source and try again.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.