Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen auch die Anleitung, die diese beinhaltet.
Schritt 1 übersetzen
Schritt 1
-
Use a spudger/tweezers/fingernail to unlatch the LCD ribbon port by pulling the grey tabs on the sides upwards (towards the top edge of the PCB).
-
Once the LCD ribbon port has been unlatched, the LCD ribbon should very easily slide out and can be removed with zero force using fingers or tweezers.
| - | [* black] Carefully note the brown colored locking bar that shims the ribbon cable in it's housing so it cannot slip. |
|---|---|
| - | [* black] Using a nylon stick (or some other ESD safe probe) ''gently'' push both sides of the locking bar up. |
| - | [* black] Now the ribbon cable should move freely. A careful prod using your nylon spudger should be able to free the cable. ''++This should ***barely*** require any force at all++''. Otherwise, check that the locking bar is fully disengaged. |
| + | [* red] Use a spudger/[product|IF145-020|tweezers]/fingernail to unlatch the LCD ribbon port by pulling the grey tabs on the sides upwards (towards the top edge of the PCB). |
| + | [* black] Once the LCD ribbon port has been unlatched, the LCD ribbon should very easily slide out and can be removed with zero force using fingers or tweezers. |
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.