Zum Hauptinhalt wechseln

Sostituzione gruppo scheda logica nel MacBook Pro 15" Retina Display versione fine 2013

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 15 Anleitungen, die diese beinhalten.

Englisch
Italienisch
Schritt 9
MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 1 von 2 MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 2 von 2
  • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

  • You may need to slide the logic board a few millimeters to the left in order to get clearance for the ports along the right edge of the board.

  • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

  • Disconnecting the MagSafe 2 connector can be difficult. If you are only removing the logic board to temporarily get it out of the way, such as for a battery replacement, you may find it easier to simply remove the two 2.5 mm T5 Torx screws securing the MagSafe DC-In board, and then remove the logic board and MagSafe board together.

Sollevandola dal lato più vicino alla batteria, ruota la scheda logica verso la parte superiore del MacBook Pro.

Potrebbe essere necessario fare scivolare scheda logica di alcuni millimetri a sinistra per lasciare abbastanza spazio per le porte sul lato destro della scheda.

Usando l'estremità piatta di uno spudger, spingi con cautela il connettore MagSafe2 fuori dal suo zoccolo nella parte inferiore della scheda logica.

Scollegare il connettore del MagSafe 2 può essere complicato. Se stai rimuovendo la scheda madre solo per poco tempo, come nel caso tu debba cambiare la batteria, potresti trovare più semplice svitare le due viti Torx T5 da 2,5 mm che fissano la scheda del MagSafe e rimuovere la scheda madre e MagSafe insieme.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.