Zum Hauptinhalt wechseln

Sostituzione gruppo scheda logica nel MacBook Pro 15" Retina Display versione fine 2013

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 15 Anleitungen, die diese beinhalten.

Englisch
Italienisch

Schritt 10 übersetzen

Schritt 10
MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 1 von 3 MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 2 von 3 MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 3 von 3
  • Remove the logic board assembly from the MacBook Pro.

  • While the logic board and fans are removed, use a can of compressed air and a soft, non-static brush to remove dust and other debris from the upper case and the logic board, particularly from the fan exhaust openings along the rear edge of the upper case.

  • When reinstalling the motherboard, make sure all cables, and the two rubber heat sink/fan covers, are visible and not trapped under the motherboard.

  • Second photo, clockwise from top: battery, right speaker, keyboard backlight, AirPort/camera, display, microphone, left speaker, keyboard, and trackpad.

Rimuovi il gruppo scheda logica dal MacBook Pro.

Quando la scheda logica e le ventole sono rimosse, usa una bomboletta di aria compressa e un pennello morbido e non statico per rimuovere la polvere e altra sporcizia dal case superiore e dalla scheda logica, in particolare dalle aperture del tubo di scarico delle ventole sul lato posteriore.

Quando reinstalli la scheda madre, assicurati che tutti i cavi e le due coperture di gomma del dissipatore e della ventola siano visibili e non siano rimasti intrappolati sotto la scheda.

In senso orario dall'alto: batteria, speaker destro, retroilluminazione tastiera, AirPort/fotocamera, display, microfono, speaker sinistro, tastiera e trackpad.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.