Repariere deine Sachen Community Store

Remplacement de la carte mère du MacBook Pro 15" Retina fin 2013

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 15 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Französisch
Vorheriger Schritt

Schritt 10 übersetzen

Schritt 10
MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 1 von 3 MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 2 von 3 MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 3 von 3

  • Remove the logic board assembly from the MacBook Pro.

  • While the logic board and fans are removed, use a can of compressed air and a soft, non-static brush to remove dust and other debris from the upper case and the logic board, particularly from the fan exhaust openings along the rear edge of the upper case.

  • When reinstalling the motherboard, make sure all cables, and the two rubber heat sink/fan covers, are visible and not trapped under the motherboard.

  • Second photo, clockwise from top: battery, right speaker, keyboard backlight, AirPort/camera, display, microphone, left speaker, keyboard, and trackpad.

Retirez la carte mère complète du MacBook Pro.

Quand vous réinstallerez la carte mère, assurez vous que toutes les nappes sont visibles et qu'aucune n'est coincée sous la carte mère.

Dans le sens des aiguilles d'une montre en commençant en haut : batterie, haut-parleur droit, rétroéclairage clavier, AirPort/caméra, écran, microphone, haut-parleur gauche, clavier et trackpad (pavé tactile).

[* black] Remove the logic board assembly from the MacBook Pro.
-[* icon_reminder] When reinstalling the motherboard, make sure all cables are visible and not trapped under the motherboard.
- [* red] Clockwise from top: battery, right speaker, keyboard backlight, AirPort/camera, display, microphone, left speaker, keyboard, and trackpad.
+[* icon_note] While the logic board and fans are removed, use a can of compressed air and a soft, non-static brush to remove dust and other debris from the upper case and the logic board, particularly from the fan exhaust openings along the rear edge of the upper case.
+[* icon_reminder] When reinstalling the motherboard, make sure all cables, and the two rubber heat sink/fan covers, are visible and not trapped under the motherboard.
+ [* red] Second photo, clockwise from top: battery, right speaker, keyboard backlight, AirPort/camera, display, microphone, left speaker, keyboard, and trackpad.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.