Zum Hauptinhalt wechseln

iPod Nano 5. Generation Click Wheel tauschen

Englisch
Deutsch
Schritt 2
iPod Nano 5th Generation Click Wheel Replacement: Schritt 0, Bild 1 von 3 iPod Nano 5th Generation Click Wheel Replacement: Schritt 0, Bild 2 von 3 iPod Nano 5th Generation Click Wheel Replacement: Schritt 0, Bild 3 von 3
  • Unscrew two screws from the metal retainer at the bottom of the iPod:

  • 4.4 mm angled Phillips screw

  • 5.4 mm Phillips screw.

  • Even if they are loose, the screws may not come out on their own. Be sure not to lose the screws when removing the retainer.

  • Use a plastic opening tool to pry the metal retainer out from the bottom of the iPod and remove it.

Drehe drei Schrauben unten am iPod heraus:

Zwei schräg stehende 4,4 mm Kreuzschlitzschrauben.

Eine 5,4 mm Kreuzschlitzschraube.

Die Schrauben kommen nicht von selbst heraus. Achte darauf, dass du sie beim Entfernen der Verschlussplatte nicht verlierst.

Heble die metallische Verschlussplatte mit einem Plastiköffnungswerkzeug unten am iPod heraus und entferne sie.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.