Zum Hauptinhalt wechseln

iPod Nano 5. Generation Click Wheel tauschen

Englisch
Deutsch

Schritt 1 übersetzen

Schritt 1
iPod Nano 5th Generation Click Wheel Replacement: Schritt 0, Bild 1 von 3 iPod Nano 5th Generation Click Wheel Replacement: Schritt 0, Bild 2 von 3 iPod Nano 5th Generation Click Wheel Replacement: Schritt 0, Bild 3 von 3
  • Use a heat gun to soften the adhesive underneath the plastic bezel at the bottom of the iPod.

  • Use a low heat setting and do not hold the heat gun in place for too long to avoid melting the plastic bezel.

  • Use a plastic opening tool to pry the bezel from the case of the iPod and remove it.

Erwärme mit einem Heißluftgebläse den Kleber unter der Kunstoffblende am unteren Rand des iPods.

Stelle die Temperatur auf niedrig und halte den Luftstrom nicht zu lange auf eine Stelle, sonst könnte die Blende schmelzen.

Heble die Blende mit einem Kunststoffwerkzeug vom Gehäuse des iPods ab.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.