Schritt 2 übersetzen
Schritt 2
-
Remove the three 3mm JIS #000 screws connecting the SD card reader to the back of the device.
-
Carefully lift the SD card board out of the camera.
| - | [* red] Remove the three 3nm Phillips #000 screws connecting the SD card reader to the back of the device. |
|---|---|
| + | [* red] Remove the three 3mm JIS #000 screws connecting the SD card reader to the back of the device. |
| + | [* black] Carefully lift the SD card board out of the camera. |
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.